Towertop 12V 2/10/25A Smart Battery Charger/Maintainer Fully Automatic with Engine Start, Cable Clamps

TowerTop Smart Battery Charger/Maintainer, Charges 12 Volt Lead Acid batteries including Standard, AGM, GEL, and Sealed Lead Acid.

➤Warning:
For 12V battery only, not to be used with 24V battery.
Do not charge a frozen or dead battery that has gone below 3V.

➤7-STAGE CHARGING AND MAINTENANCE MODES：
1. Desulphation: Pulse charges the battery to break down the build-up of lead sulphate crystals. Lead sulphate crystals can occur when a battery has been discharged or left unused for a period of time, seriously affecting the performance and lifespan of the battery.
2. Soft Start: A slow steady buildup of the charging process that limits the power supplied to protect the battery.
3. Bulk Charge: The main part of the charging process where 80% of the charge is applied.
4. Absorption: Fully charges the battery by slowly reducing the charge rate to allow the battery to absorb more power.
5. Battery Test: An automatic test to determine the battery condition after charging. If further charging is required, the Recondition stage is selected. If fully charged, the battery goes into Float status.
6. Recondition: Unique charge state to recover deeply discharged batteries.
7. Float: Maintains the battery at 100% charge without overcharging or damaging the battery, allowing the Smart Charger to be left connected to the battery indefinitely.

➤Specifications:
Rated input voltage: 120V AC/60Hz
Input current: 6A
Rated output voltage: 12V DC
Working temperature: 32F (0C) – 104F (40C)
1 x Battery Charger
1 x DC Output Cable with Clip Connectors
1 x User ManualBrand:TOWERTOP|Manufacturer:TowerTop|Assembled Product Weight:5.62 lb|Assembled Product Dimensions (L x W x H):11.96 x 9.25 x 5.82 Inches